Bootdata ok (command line is root=/dev/sda2 vga=0x314 selinux=0 console=tty0 resume=/dev/sda1 elevator=cfq splash=silent) Linux version 2.6.5-7.97-smp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Fri Jul 2 14:21:59 UTC 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009a400 (usable) BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000cc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000fbf70000 (usable) BIOS-e820: 00000000fbf70000 - 00000000fbf76000 (ACPI data) BIOS-e820: 00000000fbf76000 - 00000000fbf80000 (ACPI NVS) BIOS-e820: 00000000fbf80000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) Scanning NUMA topology in Northbridge 24 Number of nodes 4 (70030) Node 0 MemBase 0000000000000000 Limit 000000007fffffff Node 1 MemBase 0000000080000000 Limit 00000000ffffffff Node 2 MemBase 0000000100000000 Limit 000000017fffffff Node 3 MemBase 0000000180000000 Limit 00000001bfffffff node 1 shift 24 addr ff000000 conflict 0 Using node hash shift of 25 Bootmem setup node 0 0000000000000000-000000007fffffff Bootmem setup node 1 0000000080000000-00000000ffffffff Bootmem setup node 2 0000000100000000-000000017fffffff Bootmem setup node 3 0000000180000000-00000001bfffffff No mptable found. On node 0 totalpages: 524287 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 520191 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 On node 1 totalpages: 524287 DMA zone: 0 pages, LIFO batch:1 Normal zone: 524287 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 On node 2 totalpages: 524287 DMA zone: 0 pages, LIFO batch:1 Normal zone: 524287 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 On node 3 totalpages: 262143 DMA zone: 0 pages, LIFO batch:1 Normal zone: 262143 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f6a10 ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ 0x00000000fbf7313b ACPI: FADT (v003 AMD HAMMER 0x06040000 PTEC 0x000f4240) @ 0x00000000fbf7328f ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x00000000fbf75bfc ACPI: HPET (v001 AMD HAMMER 0x06040000 PTEC 0x00000000) @ 0x00000000fbf75d74 ACPI: SSDT (v001 AMD-K8 AMD-ACPI 0x06040000 AMD 0x00000001) @ 0x00000000fbf75dac ACPI: SSDT (v001 AMD-K8 AMD-ACPI 0x06040000 AMD 0x00000001) @ 0x00000000fbf75e49 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000fbf75ee6 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x00000000fbf75fb0 ACPI: DSDT (v001 AMD-K8 AMDACPI 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) Processor #4 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) Processor #5 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 15:1 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 8 IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfc000000] global_irq_base[0x18]) IOAPIC[1]: Assigned apic_id 9 IOAPIC[1]: apic_id 9, version 17, address 0xfc000000, GSI 24-27 ACPI: IOAPIC (id[0x0a] address[0xfc001000] global_irq_base[0x1c]) IOAPIC[2]: Assigned apic_id 10 IOAPIC[2]: apic_id 10, version 17, address 0xfc001000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x102282a0 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Checking aperture... CPU 0: aperture @ 0 size 32 MB No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Built 4 zonelists Kernel command line: root=/dev/sda2 vga=0x314 selinux=0 console=tty0 resume=/dev/sda1 elevator=cfq splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 16 (order 4: 256 bytes) CKRM Initialization ...... Initializing ClassType ........ ...... Initializing ClassType ........ CKRM Initialization done time.c: Using 14.318180 MHz HPET timer. time.c: Detected 2004.838 MHz processor. Console: colour dummy device 80x25 Memory: 7099780k/7340032k available (2312k kernel code, 0k reserved, 872k data, 204k init) Calibrating delay loop... 3964.92 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Disabled at boot. Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 Using local APIC NMI watchdog using perfctr0 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU0: AMD Opteron(tm) Processor 870 stepping 00 per-CPU timeslice cutoff: 1023.98 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 rip 6000 rsp 10037e89f58 Initializing CPU#1 Calibrating delay loop... 4005.88 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 AMD Opteron(tm) Processor 870 stepping 00 Booting processor 2/2 rip 6000 rsp 1017ffadf58 Initializing CPU#2 Calibrating delay loop... 4005.88 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 1 AMD Opteron(tm) Processor 870 stepping 00 Booting processor 3/3 rip 6000 rsp 10180e7ff58 Initializing CPU#3 Calibrating delay loop... 4005.88 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 1 AMD Opteron(tm) Processor 870 stepping 00 Booting processor 4/4 rip 6000 rsp 10180e6df58 Initializing CPU#4 Calibrating delay loop... 4005.88 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 2 AMD Opteron(tm) Processor 870 stepping 00 Booting processor 5/5 rip 6000 rsp 10081c47f58 Initializing CPU#5 Calibrating delay loop... 4005.88 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 2 AMD Opteron(tm) Processor 870 stepping 00 Booting processor 6/6 rip 6000 rsp 1017ff79f58 Initializing CPU#6 Calibrating delay loop... 4005.88 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 3 AMD Opteron(tm) Processor 870 stepping 00 Booting processor 7/7 rip 6000 rsp 1017ff67f58 Initializing CPU#7 Calibrating delay loop... 4005.88 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 3 AMD Opteron(tm) Processor 870 stepping 00 Total of 8 processors activated (32006.14 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 10-0, 10-1, 10-2, 10-3 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. Detected 12.530 MHz APIC timer. checking TSC synchronization across 8 CPUs: passed. time.c: Using HPET based timekeeping. Brought up 8 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Looking for DSDT in initrd ...No customized DSDT found in initrd! NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT] IOAPIC[0]: Set PCI routing entry (8-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) 00:01:00[A] -> 8-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (8-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) 00:01:00[B] -> 8-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (8-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1) 00:01:00[C] -> 8-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (8-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1) 00:01:00[D] -> 8-19 -> IRQ 19 IOAPIC[1]: Set PCI routing entry (9-3 -> 0xc9 -> IRQ 27 Mode:1 Active:1) 00:02:03[A] -> 9-3 -> IRQ 27 IOAPIC[1]: Set PCI routing entry (9-0 -> 0xd1 -> IRQ 24 Mode:1 Active:1) 00:02:03[B] -> 9-0 -> IRQ 24 IOAPIC[1]: Set PCI routing entry (9-1 -> 0xd9 -> IRQ 25 Mode:1 Active:1) 00:02:03[C] -> 9-1 -> IRQ 25 IOAPIC[1]: Set PCI routing entry (9-2 -> 0xe1 -> IRQ 26 Mode:1 Active:1) 00:02:03[D] -> 9-2 -> IRQ 26 IOAPIC[2]: Set PCI routing entry (10-0 -> 0xe9 -> IRQ 28 Mode:1 Active:1) 00:03:03[A] -> 10-0 -> IRQ 28 IOAPIC[2]: Set PCI routing entry (10-1 -> 0x32 -> IRQ 29 Mode:1 Active:1) 00:03:03[B] -> 10-1 -> IRQ 29 IOAPIC[2]: Set PCI routing entry (10-2 -> 0x3a -> IRQ 30 Mode:1 Active:1) 00:03:03[C] -> 10-2 -> IRQ 30 IOAPIC[2]: Set PCI routing entry (10-3 -> 0x42 -> IRQ 31 Mode:1 Active:1) 00:03:03[D] -> 10-3 -> IRQ 31 number of MP IRQ sources: 15. number of IO-APIC #8 registers: 24. number of IO-APIC #9 registers: 4. number of IO-APIC #10 registers: 4. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 A9 11 001 01 1 1 0 1 0 1 1 B1 12 001 01 1 1 0 1 0 1 1 B9 13 001 01 1 1 0 1 0 1 1 C1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #9...... .... register #00: 09000000 ....... : physical APIC id: 09 .... register #01: 00030011 ....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 1 1 0 1 0 1 1 D1 01 001 01 1 1 0 1 0 1 1 D9 02 001 01 1 1 0 1 0 1 1 E1 03 001 01 1 1 0 1 0 1 1 C9 IO APIC #10...... .... register #00: 0A000000 ....... : physical APIC id: 0A .... register #01: 00030011 ....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 1 1 0 1 0 1 1 E9 01 001 01 1 1 0 1 0 1 1 32 02 001 01 1 1 0 1 0 1 1 3A 03 001 01 1 1 0 1 0 1 1 42 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ24 -> 1:0 IRQ25 -> 1:1 IRQ26 -> 1:2 IRQ27 -> 1:3 IRQ28 -> 2:0 IRQ29 -> 2:1 IRQ30 -> 2:2 IRQ31 -> 2:3 .................................... done. PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture vesafb: framebuffer at 0xfd000000, mapped to 0xffffff000000c000, size 8128k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 mtrr: type mismatch for fd000000,400000 old: write-back new: write-combining mtrr: type mismatch for fd000000,200000 old: write-back new: write-combining mtrr: type mismatch for fd000000,100000 old: write-back new: write-combining mtrr: type mismatch for fd000000,80000 old: write-back new: write-combining mtrr: type mismatch for fd000000,40000 old: write-back new: write-combining mtrr: type mismatch for fd000000,20000 old: write-back new: write-combining mtrr: type mismatch for fd000000,10000 old: write-back new: write-combining mtrr: type mismatch for fd000000,8000 old: write-back new: write-combining mtrr: type mismatch for fd000000,4000 old: write-back new: write-combining mtrr: type mismatch for fd000000,2000 old: write-back new: write-combining mtrr: type mismatch for fd000000,1000 old: write-back new: write-combining mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x800 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x400 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x200 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x100 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x80 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x40 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x20 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x10 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x8 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x4 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x2 base: 0xfd000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x1 base: 0xfd000000 fb0: VESA VGA frame buffer device Initial HugeTLB pages allocated: 0 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API PCI: Via IRQ fixup for 0000:01:03.0, from 5 to 1 PCI: Via IRQ fixup for 0000:01:03.1, from 11 to 0 silentjpeg size 28539 bytes,<6>...found (800x600, 18412 bytes, v3). Console: switching to colour frame buffer device 92x32 Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio hda: _NEC DVD_RW ND-4570A, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 32768 buckets, 512Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). SCSI subsystem initialized libata version 1.02 loaded. sata_sil version 0.54 ata1: SATA max UDMA/100 cmd 0xFFFFFF00008F9480 ctl 0xFFFFFF00008F948A bmdma 0xFFFFFF00008F9400 irq 19 ata2: SATA max UDMA/100 cmd 0xFFFFFF00008F94C0 ctl 0xFFFFFF00008F94CA bmdma 0xFFFFFF00008F9408 irq 19 ata3: SATA max UDMA/100 cmd 0xFFFFFF00008F9680 ctl 0xFFFFFF00008F968A bmdma 0xFFFFFF00008F9600 irq 19 ata4: SATA max UDMA/100 cmd 0xFFFFFF00008F96C0 ctl 0xFFFFFF00008F96CA bmdma 0xFFFFFF00008F9608 irq 19 ata1: no device found (phy stat 00000000) ata1: thread exiting scsi0 : sata_sil ata2: no device found (phy stat 00000000) ata2: thread exiting scsi1 : sata_sil ata3: no device found (phy stat 00000000) ata3: thread exiting scsi2 : sata_sil ata4: no device found (phy stat 00000000) ata4: thread exiting scsi3 : sata_sil Fusion MPT base driver 3.01.03 Copyright (c) 1999-2004 LSI Logic Corporation mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator,Target} mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator,Target} Fusion MPT SCSI Host driver 3.01.03 scsi4 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=24 scsi5 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=25 Vendor: SEAGATE Model: ST3300007LC Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 585937500 512-byte hdwr sectors (300000 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi5, channel 0, id 0, lun 0 ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode reiserfs: using flush barriers ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) reiserfs: disabling flush barriers on sda2 ReiserFS: sda2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 204k freed Adding 1052216k swap on /dev/sda1. Priority:42 extents:1 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com subfs 0.9 tg3.c:v2.9 (March 8, 2004) eth0: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:5b:d7:ff eth1: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:5b:d8:00 usbcore: registered new driver usbfs usbcore: registered new driver hub tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) ACPI: Processor [CPU4] (supports C1) ACPI: Processor [CPU5] (supports C1) ACPI: Processor [CPU6] (supports C1) ACPI: Processor [CPU7] (supports C1) hw_random: AMD768 system management I/O registers at 0xC000. hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:01:03.0: UHCI Host Controller ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 parport0: PC-style at 0x378 [PCSPP] uhci_hcd 0000:01:03.0: irq 17, io base 0000000000002400 uhci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.5-7.97-smp uhci_hcd usb usb1: SerialNumber: 0000:01:03.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:01:03.1: UHCI Host Controller uhci_hcd 0000:01:03.1: irq 16, io base 0000000000002420 uhci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 2 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.5-7.97-smp uhci_hcd usb usb2: SerialNumber: 0000:01:03.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ehci_hcd 0000:01:03.2: EHCI Host Controller ehci_hcd 0000:01:03.2: irq 18, pci mem ffffff000096b000 ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.5-7.97-smp ehci_hcd usb usb3: SerialNumber: 0000:01:03.2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ohci_hcd 0000:01:00.0: OHCI Host Controller ohci_hcd 0000:01:00.0: irq 19, pci mem ffffff000096d000 ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.5-7.97-smp ohci_hcd usb usb4: SerialNumber: 0000:01:00.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:01:00.1: OHCI Host Controller ohci_hcd 0000:01:00.1: irq 19, pci mem ffffff000096f000 ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 5 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.5-7.97-smp ohci_hcd usb usb5: SerialNumber: 0000:01:00.1 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected lp0: using parport0 (polling). drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 inserting floppy driver for 2.6.5-7.97-smp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 st: Version 20040318, fixed bufsize 32768, s/g segs 256 Attached scsi generic sg0 at scsi5, channel 0, id 0, lun 0, type 0 eth0: no IPv6 routers present mtrr: type mismatch for fd000000,800000 old: write-back new: write-combining mtrr: type mismatch for fd000000,800000 old: write-back new: write-combining cdrom: open failed. cdrom: open failed. udf: registering filesystem cdrom: open failed. subfs: unsuccessful attempt to mount media (256) end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 subfs: unsuccessful attempt to mount media (256)