[ 0.000000] Bootdata ok (command line is root=/dev/sda1 ro quiet splash) [ 0.000000] Linux version 2.6.15-20-amd64-server (buildd@yellow) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP Tue Apr 4 18:21:55 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a400 (usable) [ 0.000000] BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000cc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000fbf70000 (usable) [ 0.000000] BIOS-e820: 00000000fbf70000 - 00000000fbf76000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fbf76000 - 00000000fbf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fbf80000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000200000000 (usable) [ 0.000000] ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f6a10 [ 0.000000] ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ 0x00000000fbf7313b [ 0.000000] ACPI: FADT (v003 AMD HAMMER 0x06040000 PTEC 0x000f4240) @ 0x00000000fbf7328f [ 0.000000] ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x00000000fbf75bfc [ 0.000000] ACPI: HPET (v001 AMD HAMMER 0x06040000 PTEC 0x00000000) @ 0x00000000fbf75d74 [ 0.000000] ACPI: SSDT (v001 AMD-K8 AMD-ACPI 0x06040000 AMD 0x00000001) @ 0x00000000fbf75dac [ 0.000000] ACPI: SSDT (v001 AMD-K8 AMD-ACPI 0x06040000 AMD 0x00000001) @ 0x00000000fbf75e49 [ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000fbf75ee6 [ 0.000000] ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x00000000fbf75fb0 [ 0.000000] ACPI: DSDT (v001 AMD-K8 AMDACPI 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-fc000000 [ 0.000000] SRAT: Node 2 PXM 2 100000000-180000000 [ 0.000000] SRAT: Node 3 PXM 3 180000000-200000000 [ 0.000000] Using 31 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] Bootmem setup node 1 0000000080000000-00000000fc000000 [ 0.000000] Bootmem setup node 2 0000000100000000-0000000180000000 [ 0.000000] Bootmem setup node 3 0000000180000000-0000000200000000 [ 0.000000] On node 0 totalpages: 516076 [ 0.000000] DMA zone: 2996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 513080 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] On node 1 totalpages: 500816 [ 0.000000] DMA zone: 0 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 500816 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] On node 2 totalpages: 517120 [ 0.000000] DMA zone: 0 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 0 pages, LIFO batch:0 [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] On node 3 totalpages: 517120 [ 0.000000] DMA zone: 0 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 0 pages, LIFO batch:0 [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0xc008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] Processor #2 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] Processor #3 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] Processor #4 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] Processor #5 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] Processor #6 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] Processor #7 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfc000000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xfc000000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfc001000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 10, version 17, address 0xfc001000, GSI 28-31 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at fc400000 (gap: fc000000:2c00000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ 0 size 32 MB [ 0.000000] No AGP bridge found [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 4000000 [ 0.000000] SMP: Allowing 12 CPUs, 4 hotplug CPUs [ 0.000000] Built 4 zonelists [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 14.318180 MHz HPET timer. [ 0.000000] time.c: Detected 2004.838 MHz processor. [ 56.099987] Console: colour VGA+ 80x25 [ 56.105671] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 56.114742] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 56.288729] Memory: 8119060k/8388608k available (2094k kernel code, 203028k reserved, 799k data, 176k init) [ 56.436828] Calibrating delay using timer specific routine.. 4013.91 BogoMIPS (lpj=20069566) [ 56.436955] Security Framework v1.0.0 initialized [ 56.436960] SELinux: Disabled at boot. [ 56.437024] Mount-cache hash table entries: 256 [ 56.437160] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 56.437163] CPU: L2 Cache: 1024K (64 bytes/line) [ 56.437165] CPU 0(2) -> Node 0 -> Core 0 [ 56.437173] mtrr: v2.0 (20020519) [ 56.437286] checking if image is initramfs... it is [ 56.974628] Freeing initrd memory: 6848k freed [ 56.979062] ACPI: Looking for DSDT ... not found! [ 57.080309] Using local APIC timer interrupts. [ 57.130116] Detected 12.530 MHz APIC timer. [ 57.130253] Booting processor 1/8 APIC 0x1 [ 57.140547] Initializing CPU#1 [ 57.285426] Calibrating delay using timer specific routine.. 4009.14 BogoMIPS (lpj=20045715) [ 57.285432] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 57.285434] CPU: L2 Cache: 1024K (64 bytes/line) [ 57.285437] CPU 1(2) -> Node 0 -> Core 1 [ 57.285561] AMD Opteron(tm) Processor 870 stepping 00 [ 57.285569] CPU 1: Syncing TSC to CPU 0. [ 57.285717] CPU 1: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 839 cycles) [ 57.285787] Booting processor 2/8 APIC 0x2 [ 57.296085] Initializing CPU#2 [ 57.445163] Calibrating delay using timer specific routine.. 4009.15 BogoMIPS (lpj=20045798) [ 57.445170] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 57.445172] CPU: L2 Cache: 1024K (64 bytes/line) [ 57.445175] CPU 2(2) -> Node 1 -> Core 0 [ 57.445305] AMD Opteron(tm) Processor 870 stepping 00 [ 57.445314] CPU 2: Syncing TSC to CPU 0. [ 57.445460] CPU 2: synchronized TSC with CPU 0 (last diff -117 cycles, maxerr 844 cycles) [ 57.445538] Booting processor 3/8 APIC 0x3 [ 57.455836] Initializing CPU#3 [ 57.604901] Calibrating delay using timer specific routine.. 4009.19 BogoMIPS (lpj=20045950) [ 57.604907] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 57.604910] CPU: L2 Cache: 1024K (64 bytes/line) [ 57.604912] CPU 3(2) -> Node 1 -> Core 1 [ 57.605043] AMD Opteron(tm) Processor 870 stepping 00 [ 57.605052] CPU 3: Syncing TSC to CPU 0. [ 57.605198] CPU 3: synchronized TSC with CPU 0 (last diff -117 cycles, maxerr 847 cycles) [ 57.605263] Booting processor 4/8 APIC 0x4 [ 57.615560] Initializing CPU#4 [ 57.764638] Calibrating delay using timer specific routine.. 4009.13 BogoMIPS (lpj=20045674) [ 57.764645] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 57.764647] CPU: L2 Cache: 1024K (64 bytes/line) [ 57.764649] CPU 4(2) -> Node 2 -> Core 0 [ 57.764781] AMD Opteron(tm) Processor 870 stepping 00 [ 57.764790] CPU 4: Syncing TSC to CPU 0. [ 57.764936] CPU 4: synchronized TSC with CPU 0 (last diff -116 cycles, maxerr 844 cycles) [ 57.764996] Booting processor 5/8 APIC 0x5 [ 57.775294] Initializing CPU#5 [ 57.924376] Calibrating delay using timer specific routine.. 4009.16 BogoMIPS (lpj=20045801) [ 57.924382] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 57.924384] CPU: L2 Cache: 1024K (64 bytes/line) [ 57.924387] CPU 5(2) -> Node 2 -> Core 1 [ 57.924518] AMD Opteron(tm) Processor 870 stepping 00 [ 57.924527] CPU 5: Syncing TSC to CPU 0. [ 57.924673] CPU 5: synchronized TSC with CPU 0 (last diff -118 cycles, maxerr 845 cycles) [ 57.924732] Booting processor 6/8 APIC 0x6 [ 57.935033] Initializing CPU#6 [ 58.084113] Calibrating delay using timer specific routine.. 4009.19 BogoMIPS (lpj=20045983) [ 58.084120] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 58.084122] CPU: L2 Cache: 1024K (64 bytes/line) [ 58.084125] CPU 6(2) -> Node 3 -> Core 0 [ 58.084265] AMD Opteron(tm) Processor 870 stepping 00 [ 58.084276] CPU 6: Syncing TSC to CPU 0. [ 58.084516] CPU 6: synchronized TSC with CPU 0 (last diff -145 cycles, maxerr 1424 cycles) [ 58.084584] Booting processor 7/8 APIC 0x7 [ 58.094884] Initializing CPU#7 [ 58.243851] Calibrating delay using timer specific routine.. 4009.13 BogoMIPS (lpj=20045680) [ 58.243858] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 58.243860] CPU: L2 Cache: 1024K (64 bytes/line) [ 58.243863] CPU 7(2) -> Node 3 -> Core 1 [ 58.244001] AMD Opteron(tm) Processor 870 stepping 00 [ 58.244012] CPU 7: Syncing TSC to CPU 0. [ 58.244252] CPU 7: synchronized TSC with CPU 0 (last diff -153 cycles, maxerr 1435 cycles) [ 58.244257] Brought up 8 CPUs [ 58.244300] time.c: Using HPET based timekeeping. [ 58.244302] testing NMI watchdog ... OK. [ 58.345109] NET: Registered protocol family 16 [ 58.345138] ACPI: bus type pci registered [ 58.345487] PCI: Using configuration type 1 [ 58.346840] ACPI: Subsystem revision 20051216 [ 58.349105] ACPI: Interpreter enabled [ 58.349107] ACPI: Using IOAPIC for interrupt routing [ 58.349908] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 58.349911] PCI: Probing PCI hardware (bus 00) [ 58.352190] Boot video device is 0000:01:06.0 [ 58.363123] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 *11) [ 58.363467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11) [ 58.363805] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) [ 58.364155] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) [ 58.366743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT] [ 58.367128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT] [ 58.367335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT] [ 58.367574] Linux Plug and Play Support v0.97 (c) Adam Belay [ 58.367582] pnp: PnP ACPI init [ 58.370676] pnp: PnP ACPI: found 13 devices [ 58.370689] PCI: Using ACPI for IRQ routing [ 58.370692] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 58.370804] hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 [ 58.370809] hpet0: 3 32-bit timers, 14318180 Hz [ 58.371873] PCI-DMA: Disabling AGP. [ 58.371914] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 58.371920] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 58.372069] pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 58.372410] PCI: Bridge: 0000:00:06.0 [ 58.372413] IO window: 2000-2fff [ 58.372419] MEM window: fc100000-fdffffff [ 58.372423] PREFETCH window: fe100000-fe1fffff [ 58.372429] PCI: Bridge: 0000:00:0a.0 [ 58.372431] IO window: 3000-3fff [ 58.372435] MEM window: fe000000-fe0fffff [ 58.372438] PREFETCH window: fe200000-fe3fffff [ 58.372442] PCI: Bridge: 0000:00:0b.0 [ 58.372443] IO window: disabled. [ 58.372446] MEM window: disabled. [ 58.372448] PREFETCH window: disabled. [ 58.373475] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 58.374105] audit: initializing netlink socket (disabled) [ 58.374114] audit(1147275392.280:1): initialized [ 58.374639] VFS: Disk quotas dquot_6.5.1 [ 58.374680] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 58.374776] Initializing Cryptographic API [ 58.374780] io scheduler noop registered [ 58.374806] io scheduler anticipatory registered [ 58.374828] io scheduler deadline registered [ 58.374897] io scheduler cfq registered [ 58.374903] PCI: MSI quirk detected. pci_msi_quirk set. [ 58.374906] PCI: MSI quirk detected. pci_msi_quirk set. [ 58.398926] Linux agpgart interface v0.101 (c) Dave Jones [ 58.399083] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 58.400774] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 58.400940] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 58.400946] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 58.401112] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 58.401247] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 58.403675] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 58.403862] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 58.404655] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 58.404719] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 58.404723] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 58.404726] ACPI: bus type ide registered [ 58.404993] mice: PS/2 mouse device common for all mice [ 58.405385] NET: Registered protocol family 2 [ 58.433201] input: AT Translated Set 2 keyboard as /class/input/input0 [ 58.528241] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 58.529649] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 58.532311] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 58.533022] TCP: Hash tables configured (established 262144 bind 65536) [ 58.533025] TCP reno registered [ 58.533188] TCP bic registered [ 58.533213] NET: Registered protocol family 1 [ 58.533220] NET: Registered protocol family 8 [ 58.533222] NET: Registered protocol family 20 [ 58.533379] ACPI wakeup devices: [ 58.533381] COMA COMB TP2P USB USB1 USB2 G0PA G0PB [ 58.533386] ACPI: (supports S0 S1 S4 S5) [ 58.533538] Freeing unused kernel memory: 176k freed [ 58.562507] Capability LSM initialized [ 58.847682] SCSI subsystem initialized [ 58.849009] libata version 1.20 loaded. [ 58.850556] sata_sil 0000:01:05.0: version 0.9 [ 58.850578] GSI 16 sharing vector 0xA9 and IRQ 16 [ 58.850582] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 169 [ 58.851197] ata1: SATA max UDMA/100 cmd 0xFFFFC2000001A480 ctl 0xFFFFC2000001A48A bmdma 0xFFFFC2000001A400 irq 169 [ 58.851245] ata2: SATA max UDMA/100 cmd 0xFFFFC2000001A4C0 ctl 0xFFFFC2000001A4CA bmdma 0xFFFFC2000001A408 irq 169 [ 58.851284] ata3: SATA max UDMA/100 cmd 0xFFFFC2000001A680 ctl 0xFFFFC2000001A68A bmdma 0xFFFFC2000001A600 irq 169 [ 58.851321] ata4: SATA max UDMA/100 cmd 0xFFFFC2000001A6C0 ctl 0xFFFFC2000001A6CA bmdma 0xFFFFC2000001A608 irq 169 [ 59.057232] ata1: no device found (phy stat 00000000) [ 59.057235] scsi0 : sata_sil [ 59.266916] ata2: no device found (phy stat 00000000) [ 59.266919] scsi1 : sata_sil [ 59.476603] ata3: no device found (phy stat 00000000) [ 59.476605] scsi2 : sata_sil [ 59.686288] ata4: no device found (phy stat 00000000) [ 59.686290] scsi3 : sata_sil [ 59.717520] AMD8111: IDE controller at PCI slot 0000:00:07.1 [ 59.717536] AMD8111: chipset revision 3 [ 59.717538] AMD8111: not 100% native mode: will probe irqs later [ 59.717546] AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller [ 59.717556] ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:pio [ 59.717567] ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio [ 59.717574] Probing IDE interface ide0... [ 60.505168] hda: _NEC DVD_RW ND-4570A, ATAPI CD/DVD-ROM drive [ 61.224418] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 61.224449] Probing IDE interface ide1... [ 61.840592] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 61.840602] Uniform CD-ROM driver Revision: 3.20 [ 61.874616] Fusion MPT base driver 3.03.04 [ 61.874619] Copyright (c) 1999-2005 LSI Logic Corporation [ 61.876579] Fusion MPT SPI Host driver 3.03.04 [ 61.877078] GSI 17 sharing vector 0xB1 and IRQ 17 [ 61.877083] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 24 (level, low) -> IRQ 177 [ 61.877116] mptbase: Initiating ioc0 bringup [ 63.051231] ioc0: 53C1030: Capabilities={Initiator,Target} [ 64.247862] scsi4 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=177 [ 67.992776] GSI 18 sharing vector 0xB9 and IRQ 18 [ 67.992779] ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 25 (level, low) -> IRQ 185 [ 67.992802] mptbase: Initiating ioc1 bringup [ 69.172040] ioc1: 53C1030: Capabilities={Initiator,Target} [ 70.368664] scsi5 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=185 [ 70.383751] Vendor: SEAGATE Model: ST3300007LC Rev: 0004 [ 70.383758] Type: Direct-Access ANSI SCSI revision: 03 [ 71.383659] SCSI device sda: 585937500 512-byte hdwr sectors (300000 MB) [ 72.382281] SCSI device sda: drive cache: write back [ 73.415826] SCSI device sda: 585937500 512-byte hdwr sectors (300000 MB) [ 73.916114] SCSI device sda: drive cache: write back [ 73.916118] sda: sda1 sda2 < sda5 > [ 73.933659] sd 5:0:0:0: Attached scsi disk sda [ 74.180109] usbcore: registered new driver usbfs [ 74.180131] usbcore: registered new driver hub [ 74.181451] USB Universal Host Controller Interface driver v2.3 [ 74.181576] GSI 19 sharing vector 0xC1 and IRQ 19 [ 74.181582] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 17 (level, low) -> IRQ 193 [ 74.181588] PCI: Via IRQ fixup for 0000:01:03.0, from 5 to 1 [ 74.181615] uhci_hcd 0000:01:03.0: UHCI Host Controller [ 74.181973] uhci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 1 [ 74.181988] uhci_hcd 0000:01:03.0: irq 193, io base 0x00002400 [ 74.182104] hub 1-0:1.0: USB hub found [ 74.182111] hub 1-0:1.0: 2 ports detected [ 74.182200] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 74.182250] ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 169 [ 74.182584] ohci_hcd 0000:01:00.0: OHCI Host Controller [ 74.384829] GSI 20 sharing vector 0xC9 and IRQ 20 [ 74.384832] ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 16 (level, low) -> IRQ 201 [ 74.384838] PCI: Via IRQ fixup for 0000:01:03.1, from 11 to 9 [ 74.384863] uhci_hcd 0000:01:03.1: UHCI Host Controller [ 74.384912] uhci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 2 [ 74.384925] uhci_hcd 0000:01:03.1: irq 201, io base 0x00002420 [ 74.385037] hub 2-0:1.0: USB hub found [ 74.385045] hub 2-0:1.0: 2 ports detected [ 74.494122] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 74.494128] ohci_hcd 0000:01:00.0: irq 169, io mem 0xfc100000 [ 74.556065] hub 3-0:1.0: USB hub found [ 74.556076] hub 3-0:1.0: 3 ports detected [ 74.663846] ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 169 [ 74.664244] ohci_hcd 0000:01:00.1: OHCI Host Controller [ 74.883537] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 4 [ 74.883546] ohci_hcd 0000:01:00.1: irq 169, io mem 0xfc101000 [ 74.945479] hub 4-0:1.0: USB hub found [ 74.945490] hub 4-0:1.0: 3 ports detected [ 75.053428] GSI 21 sharing vector 0xD1 and IRQ 21 [ 75.053432] ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 18 (level, low) -> IRQ 209 [ 75.053437] PCI: Via IRQ fixup for 0000:01:03.2, from 10 to 1 [ 75.053667] ehci_hcd 0000:01:03.2: EHCI Host Controller [ 75.053772] ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 5 [ 75.053786] ehci_hcd 0000:01:03.2: irq 209, io mem 0xfc103000 [ 75.053799] ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 75.053882] hub 5-0:1.0: USB hub found [ 75.053890] hub 5-0:1.0: 4 ports detected [ 75.190751] Probing IDE interface ide1... [ 75.846467] Attempting manual resume [ 75.872296] kjournald starting. Commit interval 5 seconds [ 75.872307] EXT3-fs: mounted filesystem with ordered data mode. [ 77.512540] sd 5:0:0:0: Attached scsi generic sg0 type 0 [ 77.625917] input: PC Speaker as /class/input/input1 [ 77.642003] Floppy drive(s): fd0 is 1.44M [ 77.659969] Real Time Clock Driver v1.12 [ 77.670940] FDC 0 is a post-1991 82077 [ 77.712702] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 77.715445] shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 [ 77.715461] shpchp: shpc_init: cannot reserve MMIO region [ 77.715552] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 77.715560] shpchp: shpc_init: cannot reserve MMIO region [ 77.715639] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 77.715646] shpchp: shpc_init: cannot reserve MMIO region [ 77.715740] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 77.751566] parport: PnPBIOS parport detected. [ 77.751624] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 77.777194] hw_random: AMD768 system management I/O registers at 0xC000. [ 77.777215] hw_random hardware driver 1.0.0 loaded [ 77.891589] tg3.c:v3.47 (Dec 28, 2005) [ 77.891607] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 177 [ 77.896749] eth0: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:5b:d7:ff [ 77.896756] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 77.896759] eth0: dma_rwctrl[769f0000] [ 77.896780] ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 185 [ 77.908399] eth1: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:5b:d8:00 [ 77.908405] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 77.908408] eth1: dma_rwctrl[769f0000] [ 77.988239] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [ 78.035363] ts: Compaq touchscreen protocol output [ 78.233644] lp0: using parport0 (interrupt-driven). [ 78.333390] Adding 11871992k swap on /dev/sda5. Priority:-1 extents:1 across:11871992k [ 78.377719] EXT3 FS on sda1, internal journal [ 78.538850] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 78.538854] md: bitmap version 4.39 [ 78.888140] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 79.610954] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 79.610958] tg3: eth0: Flow control is on for TX and on for RX. [ 80.261892] NET: Registered protocol family 10 [ 80.262196] lo: Disabled Privacy Extensions [ 80.262360] IPv6 over IPv4 tunneling driver [ 90.914985] eth0: no IPv6 routers present [ 673.656082] UDF-fs: No VRS found [ 673.780963] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 673.884600] ISO 9660 Extensions: RRIP_1991A [ 703.330403] UDF-fs: No VRS found [ 703.400773] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 703.468181] ISO 9660 Extensions: RRIP_1991A [ 751.778250] oprofile: using NMI interrupt. [ 1960.556538] UDF-fs: No VRS found [ 1960.610360] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1960.713988] ISO 9660 Extensions: RRIP_1991A [ 2119.042392] UDF-fs: No VRS found [ 2119.113466] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2119.180720] ISO 9660 Extensions: RRIP_1991A [ 2168.558227] UDF-fs: No VRS found [ 2168.607367] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2168.674272] ISO 9660 Extensions: RRIP_1991A