Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #27: Sat Jun 19 22:09:15 EEST 2004 root@ikaldus.depression.softematic.com:/usr/obj/usr/src/sys/IKALDUS Preloaded elf kernel "/boot/kernel/kernel" at 0xc0896000. Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc0896250. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0896298. Calibrating clock(s) ... i8254 clock: 1193188 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1592194204 Hz CPU: Mobile Intel(R) Celeron(R) CPU 1.60GHz (1592.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff real memory = 234291200 (223 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000000db51fff, 217235456 bytes (53036 pages) avail memory = 219598848 (209 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6b90 bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd750+0x11e pnpbios: Found PnP BIOS data at 0xc00f6bf0 pnpbios: Entry = f0000:a939 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: mem: Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 ff 01 00 01 0d 01 00 01 23 01 00 01 28 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 55 mode(s) found VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc07ab0e2 (1000022) VESA: ATI RS200M VESA: ATI Technologies Inc. MS2 01.00 random: ACPI: DSDT was overridden. ACPI-0374: *** Info: Table [DSDT] replaced by host OS npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [GIANT-LOCKED] pci_open(1): mode 1 addr port (0x0cf8) is 0x80012814 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=cab21002) pcibios: BIOS version 2.10 Found $PIR table, 12 entries at 0xc00fdf00 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x59 11 embedded 0 15 A 0x05 11 embedded 0 3 A 0x07 10 11 embedded 0 6 A 0x08 5 embedded 0 10 A 0x03 10 11 embedded 0 10 B 0x02 10 11 embedded 0 11 A 0x02 10 11 embedded 0 12 A 0x02 10 11 embedded 0 12 B 0x03 10 11 embedded 0 19 A 0x04 10 11 embedded 0 19 B 0x04 10 11 embedded 0 19 C 0x04 10 11 slot 13 1 5 A 0x01 5 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) atpic: Programming IRQ9 as level/low ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks GOOD min = 2, max = 4, width = 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_ec0: port 0x66,0x62 on acpi0 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: on acpi0 acpi_tz0: on acpi0 acpi_ec0: info: new max delay is 5 us acpi_tz1: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_lid0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.ISA_.LNK2 irq 11: [ 10 12] low,level,sharable 0.14.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 6 7 11 13] low,level,sharable 0.14.1 \\_SB_.PCI0.ISA_.LNK0 irq 5: [ 5 6] low,level,sharable 0.14.2 \\_SB_.PCI0.ISA_.LNK1 irq 11: [ 8 10] low,level,sharable 0.14.3 \\_SB_.PCI0.ISA_.LNK8 irq 11: [ 5] low,level,sharable 0.2.0 \\_SB_.PCI0.ISA_.LNK1 irq 11: [ 8 10] low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNK7 irq 5: [ 5] low,level,sharable 0.6.0 \\_SB_.PCI0.ISA_.LNK2 irq 11: [ 10 12] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNK1 irq 11: [ 8 10] low,level,sharable 0.10.1 \\_SB_.PCI0.ISA_.LNK1 irq 11: [ 8 10] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 6 7 11 13] low,level,sharable 0.19.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 6 7 11 13] low,level,sharable 0.19.1 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 6 7 11 13] low,level,sharable 0.19.2 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.PCI0.ISA_.LNK2 irq 11: [ 10 12] low,level,sharable 0.14.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 6 7 11 13] low,level,sharable 0.14.1 \\_SB_.PCI0.ISA_.LNK0 irq 5: [ 5 6] low,level,sharable 0.14.2 \\_SB_.PCI0.ISA_.LNK1 irq 11: [ 8 10] low,level,sharable 0.14.3 \\_SB_.PCI0.ISA_.LNK8 irq 11: [ 5] low,level,sharable 0.2.0 \\_SB_.PCI0.ISA_.LNK1 irq 11: [ 8 10] low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNK7 irq 5: [ 5] low,level,sharable 0.6.0 \\_SB_.PCI0.ISA_.LNK2 irq 11: [ 10 12] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNK1 irq 11: [ 8 10] low,level,sharable 0.10.1 \\_SB_.PCI0.ISA_.LNK1 irq 11: [ 8 10] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 6 7 11 13] low,level,sharable 0.19.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 6 7 11 13] low,level,sharable 0.19.1 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 6 7 11 13] low,level,sharable 0.19.2 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f4000000, size 26, enabled map[14]: type 3, range 32, base f0600000, size 12, enabled found-> vendor=0x1002, dev=0xcab2, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x3230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x7010, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f0014000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.ISA_.LNK8) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00008400, size 8, enabled map[14]: type 1, range 32, base f0015000, size 12, enabled pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.ISA_.LNK7) pcib0: slot 6 INTA is routed to irq 5 found-> vendor=0x10b9, dev=0x5451, revid=0x02 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base ffbfe000, size 12, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNK2) pcib0: slot 10 INTA is routed to irq 11 found-> vendor=0x104c, dev=0xac41, revid=0x02 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f0019000, size 11, enabled map[14]: type 1, range 32, base f0010000, size 14, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNK2) pcib0: slot 10 INTA is routed to irq 11 found-> vendor=0x104c, dev=0x8017, revid=0x02 bus=0, slot=10, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0012, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 00009000, size 8, enabled map[14]: type 1, range 32, base f0019800, size 8, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.ISA_.LNK1) pcib0: slot 11 INTA is routed to irq 11 found-> vendor=0x10ec, dev=0x8139, revid=0x20 bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0013, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f0000000, size 16, enabled map[14]: type 4, range 32, base 00008090, size 3, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.ISA_.LNK1) pcib0: slot 12 INTA is routed to irq 11 found-> vendor=0x14f1, dev=0x2f00, revid=0x01 bus=0, slot=12, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00008080, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc4 bus=0, slot=16, func=0 class=01-01-fa, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f0017000, size 12, enabled pcib0: matched entry for 0.19.INTA (src \\_SB_.PCI0.ISA_.LNK3) pcib0: slot 19 INTA is routed to irq 10 found-> vendor=0x1033, dev=0x0035, revid=0x41 bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f0018000, size 12, enabled pcib0: matched entry for 0.19.INTB (src \\_SB_.PCI0.ISA_.LNK3) pcib0: slot 19 INTB is routed to irq 10 found-> vendor=0x1033, dev=0x0035, revid=0x41 bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f0019c00, size 8, enabled pcib0: matched entry for 0.19.INTC (src \\_SB_.PCI0.ISA_.LNK3) pcib0: slot 19 INTC is routed to irq 10 found-> vendor=0x1033, dev=0x00e0, revid=0x02 bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x84 (3960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xf0300000-0xf03fffff pcib1: prefetched decode 0xf8000000-0xfbffffff ACPI PCI link initial configuration: \\_SB_.PCI0.ISA_.LNK0 irq 5: [ 5 6] low,level,sharable 1.5.0 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.PCI0.ISA_.LNK0 irq 5: [ 5 6] low,level,sharable 1.5.0 pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f8000000, size 26, enabled pcib1: device (null) requested decoded memory range 0xf8000000-0xfbffffff map[14]: type 4, range 32, base 0000a000, size 8, enabled pcib1: device (null) requested decoded I/O range 0xa000-0xa0ff map[18]: type 1, range 32, base f0300000, size 16, enabled pcib1: device (null) requested decoded memory range 0xf0300000-0xf030ffff pcib1: matched entry for 1.5.INTA (src \\_SB_.PCI0.ISA_.LNK0) pcib1: slot 5 INTA is routed to irq 5 found-> vendor=0x1002, dev=0x4337, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: at device 5.0 (no driver attached) ohci0: mem 0xf0014000-0xf0014fff irq 11 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf0014000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 6.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 cbb0: mem 0xffbfe000-0xffbfefff irq 11 at device 10.0 on pci0 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xffbfe000 cbb0: Found memory at ffbfe000 cbb0: Secondary bus is 2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac41104c 0x02100007 0x06070002 0x00822008 0x10: 0xffbfe000 0x020000a0 0x20020200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00560e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28449061 0x00000400 0x00000000 0x01001c00 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00100 0x0000001a 0x0000001f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: mem 0xf0010000-0xf0013fff,0xf0019000-0xf00197ff irq 11 at device 10.1 on pci0 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf0019000 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:08:02:71:9d:d6:49:ae fwohci0: resetting OHCI...done (loop=0) fwohci0: phy read failed(1). fwohci0: fwphy_rddata: 0x2 loop=1, retry=1 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: on fwohci0 sbp0: on firewire0 sbp_attach (cold=1) fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:08:02:d6:49:ae fwe0: bpf attached fwe0: Ethernet address: 02:08:02:d6:49:ae sbp_post_busreset fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9000 re0: port 0x9000-0x90ff mem 0xf0019800-0xf00198ff irq 11 at device 11.0 on pci0 miibus0: on re0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:08:02:d6:39:d6 re0: [GIANT-LOCKED] pci0: at device 12.0 (no driver attached) atapci0: port 0x8080-0x808f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 16.0 on pci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: at device 17.0 (no driver attached) ohci1: mem 0xf0017000-0xf0017fff irq 10 at device 19.0 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf0017000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2: mem 0xf0018000-0xf0018fff irq 10 at device 19.1 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf0018000 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: on ohci2 usb2: USB revision 1.0 uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 19.2 (no driver attached) acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) sio0: irq maps: 0xa01 0xa11 0xa01 0xa01 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) sio1: irq maps: 0xa01 0xa09 0xa01 0xa01 sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: