Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #29: Fri Nov  7 15:50:54 EET 2003
    root@ikaldus.depression.softematic.com:/usr/obj/usr/src/sys/IKALDUS_NODEBUG
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0860000.
Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc0860244.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc086028c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Celeron(R) CPU 1.60GHz (1592.20-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 234291200 (223 MB)
avail memory = 217939968 (207 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc077a3c2 (1000022)
VESA: ATI RS200M  
ACPI: DSDT was overridden.
    ACPI-0375: *** Info: Table [DSDT] replaced by host OS
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00fdf00
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_tz1: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 6 INTA is routed to irq 5
pcib0: slot 10 INTA is routed to irq 10
pcib0: slot 10 INTA is routed to irq 10
pcib0: slot 11 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 11
pcib0: slot 19 INTA is routed to irq 11
pcib0: slot 19 INTB is routed to irq 11
pcib0: slot 19 INTC is routed to irq 11
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 5 INTA is routed to irq 5
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf0014000-0xf0014fff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xf0015000-0xf0015fff irq 5 at device 6.0 on pci0
pcm0: <Analog Devices AD1886A AC97 Codec>
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
cbb0: <TI4410 PCI-CardBus Bridge> mem 0xffbfe000-0xffbfefff irq 10 at device 10.0 on pci0
cbb0: Found memory at ffbfe000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
pci0: <serial bus, FireWire> at device 10.1 (no driver attached)
re0: <RealTek 8139C+ 10/100BaseTX> port 0x9000-0x90ff mem 0xf0019800-0xf00198ff irq 11 at device 11.0 on pci0
re0: Ethernet address: 00:08:02:d6:39:d6
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <simple comms> at device 12.0 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f at device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
ohci1: <NEC uPD 9210 USB controller> mem 0xf0017000-0xf0017fff irq 11 at device 19.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2: <NEC uPD 9210 USB controller> mem 0xf0018000-0xf0018fff irq 11 at device 19.1 on pci0
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem 0xe3000-0xe3fff,0xdc000-0xe1fff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x80 on isa0
sc0: VGA <16 virtual consoles, flags=0x280>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1592197308 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
Status is 0x30000006
GEOM: create disk ad0 dp=0xc2a2ca70
ad0: 28615MB <FUJITSU MHS2030AT> [58140/16/63] at ata0-master UDMA100
acd0: CDRW <SD-R2312> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a